# Post PostProcessor Issues

**URL:** <https://titansforum.titansofcnc.com/t/post-postprocessor-issues/5561>\
**Category:** CAD/CAM/CNC\
**Created:** [December 22, 2018, 10:33pm UTC](https://titansforum.titansofcnc.com/t/post-postprocessor-issues/5561 "2018-12-22T22:33:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![DylanStewart](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@DylanStewart](https://titansforum.titansofcnc.com/u/DylanStewart)\
**Post date:** [December 22, 2018, 10:33pm UTC](https://titansforum.titansofcnc.com/t/post-postprocessor-issues/5561/1 "2018-12-22T22:33:37Z")

</div>

Currently I am in the process of trying to figure out how i can teach the curriculum and start a group, I have machines (a pair of Leadwell VMCs from the 90s) I can spare to teach with, however the controllers are Fanuc 0m, the post processor I have setup is for Mechsoft and we do our drafting in solid work, If someone could give some advice on how to get fusion 360 to interface with those controllers I would be eternally grateful (sorry for my bad english)

---

<div class="post-metadata">

**Author:** ![wayneheiligtag](https://avatars.discourse-cdn.com/v4/letter/w/ed8c4c/32.png) [@wayneheiligtag](https://titansforum.titansofcnc.com/u/wayneheiligtag)\
**Post date:** [December 23, 2018, 12:27am UTC](https://titansforum.titansofcnc.com/t/post-postprocessor-issues/5561/2 "2018-12-23T00:27:50Z")

</div>

Here is a link to fusion 360 post processers [https://cam.autodesk.com/hsmposts](https://cam.autodesk.com/hsmposts) this should have what you need. You may need this link as well to install it [https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-install-a-cloud-post-in-Fusion-360.html](https://knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-install-a-cloud-post-in-Fusion-360.html) good luck.

---

<div class="post-metadata">

**Author:** ![DylanStewart](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@DylanStewart](https://titansforum.titansofcnc.com/u/DylanStewart)\
**Post date:** [December 23, 2018, 12:48am UTC](https://titansforum.titansofcnc.com/t/post-postprocessor-issues/5561/3 "2018-12-23T00:48:10Z")

</div>

Thank you so much, sorry I should have been able to find that, I will report back with the results when I can

---

<div class="post-metadata">

**Author:** ![wayneheiligtag](https://avatars.discourse-cdn.com/v4/letter/w/ed8c4c/32.png) [@wayneheiligtag](https://titansforum.titansofcnc.com/u/wayneheiligtag)\
**Post date:** [December 23, 2018, 2:19am UTC](https://titansforum.titansofcnc.com/t/post-postprocessor-issues/5561/4 "2018-12-23T02:19:59Z")

</div>

awesome you’re most welcome
