# The art of fixturing

**URL:** <https://titansforum.titansofcnc.com/t/the-art-of-fixturing/10079>\
**Category:** Site Feedback\
**Created:** [August 28, 2020, 9:20pm UTC](https://titansforum.titansofcnc.com/t/the-art-of-fixturing/10079 "2020-08-28T21:20:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![BjarteLunde](https://avatars.discourse-cdn.com/v4/letter/b/b9e5f3/32.png) [@BjarteLunde](https://titansforum.titansofcnc.com/u/BjarteLunde)\
**Post date:** [August 28, 2020, 9:20pm UTC](https://titansforum.titansofcnc.com/t/the-art-of-fixturing/10079/1 "2020-08-28T21:20:22Z")

</div>

> **[TITAN-SUB-400 | TITANS of CNC: Academy](https://academy.titansofcnc.com/series/the-fixtures/sub-400)**
>
> COMING SOON. Learn to program and machine the TITAN SUB-400. This is the base or sub plate to which the four fixture plates will mount.

This has been marked “coming soon” for a really long time. Are you planning to release it soon?

Cheers

---

<div class="post-metadata">

**Author:** ![russell](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/russell/32/23_2.png) [@russell](https://titansforum.titansofcnc.com/u/russell)\
**Post date:** [September 1, 2020, 4:04pm UTC](https://titansforum.titansofcnc.com/t/the-art-of-fixturing/10079/2 "2020-09-01T16:04:24Z")

</div>

Thank you for your question. We have the TITAN-SUB-400 on our production schedule and we will share it here and on our social media channels when it’s ready.

---

<div class="post-metadata">

**Author:** ![ScottBeckley](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/scottbeckley/32/1378_2.png) [@ScottBeckley](https://titansforum.titansofcnc.com/u/ScottBeckley)\
**Post date:** [September 23, 2020, 10:12pm UTC](https://titansforum.titansofcnc.com/t/the-art-of-fixturing/10079/3 "2020-09-23T22:12:22Z")

</div>

Can you tell me if I will be able to make the TITAN-SUB-400 on my Tormach 770M

---

<div class="post-metadata">

**Author:** ![LD1](https://avatars.discourse-cdn.com/v4/letter/l/5daacb/32.png) [@LD1](https://titansforum.titansofcnc.com/u/LD1)\
**Post date:** [September 25, 2020, 7:31pm UTC](https://titansforum.titansofcnc.com/t/the-art-of-fixturing/10079/4 "2020-09-25T19:31:01Z")

</div>

Hello

You could but not in one shot. The sub plate is larger than the travels on your machine. It will have to be moved a few times to cover the plate dimensions. And you might not be able to reach the limits on the fixtures once they’re mounted to the subplate.

Do you need a subplate?  
Can you use a smaller one?  
Should you have one made to fit your machine?

LD