# Titan 10M Feature #40

**URL:** <https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797>\
**Category:** The Academy\
**Created:** [April 3, 2023, 10:27pm UTC](https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797 "2023-04-03T22:27:30Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![LaneTobiason](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/lanetobiason/32/1553_2.png) [@LaneTobiason](https://titansforum.titansofcnc.com/u/LaneTobiason)\
**Post date:** [April 3, 2023, 10:27pm UTC](https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797/1 "2023-04-03T22:27:30Z")

</div>

What is Feature #40 on the Titan-10M drawing/inspection sheet referring to?

Is it the bottom face of those 2 cutouts in relation to the bottom face of the part? If so, does that mean that the cutouts on the opposite side of the part are at a different height (per the ordinate dimensions)?

 ![Capture](https://canada1.discourse-cdn.com/flex035/uploads/titansofcnc/original/2X/e/ec1bdc23b008b177c189eb35230fafae2ea7fc55.jpeg)

---

<div class="post-metadata">

**Author:** ![DavidGibson](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/davidgibson/32/1079_2.png) [@DavidGibson](https://titansforum.titansofcnc.com/u/DavidGibson)\
**Post date:** [April 6, 2023, 10:56am UTC](https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797/2 "2023-04-06T10:56:51Z")

</div>

You are correct on both counts.

---

<div class="post-metadata">

**Author:** ![LaneTobiason](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/lanetobiason/32/1553_2.png) [@LaneTobiason](https://titansforum.titansofcnc.com/u/LaneTobiason)\
**Post date:** [May 4, 2023, 5:47pm UTC](https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797/3 "2023-05-04T17:47:41Z")

</div>

So I just received this.  
 ![image](https://canada1.discourse-cdn.com/flex035/uploads/titansofcnc/original/2X/0/0da2e2c235867a55db4bcc09ffaf70f96856999b.png)  
Per the inspector they need to be the same height, but per the drawing they are not.  
Anyone have any ideas?

---

<div class="post-metadata">

**Author:** ![StephenHadwin](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/stephenhadwin/32/1564_2.png) [@StephenHadwin](https://titansforum.titansofcnc.com/u/StephenHadwin)\
**Post date:** [May 5, 2023, 12:52pm UTC](https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797/4 "2023-05-05T12:52:51Z")

</div>

I would correct the part to match the inspector note, Inspection note #40 states 2X.250 typ for the end pocket face. The coordinate dimensions on the left are not going to be inspected by the inspector model. IMHO

---

<div class="post-metadata">

**Author:** ![KeithKnutzen](https://yyz1.discourse-cdn.com/flex035/user_avatar/titansforum.titansofcnc.com/keithknutzen/32/1685_2.png) [@KeithKnutzen](https://titansforum.titansofcnc.com/u/KeithKnutzen)\
**Post date:** [August 29, 2023, 6:29pm UTC](https://titansforum.titansofcnc.com/t/titan-10m-feature-40/12797/5 "2023-08-29T18:29:16Z")

</div>

That is crazy! Who would have thought the construction dimensions would be so wrong. I wonder if that was a mistake or if they make that mistake to teach us something. I for one submitted the model twice thinking the problem was on the right side of my part. Then again, my inspector note wasn’t so descriptive!
