I am not sure what I am doing wrong or if there is a glitch with the extrude function right now, but I am unable to use the “from object” and then offset the -.325 and have the pocket create the taper from the revolve that was done.
Thanks in advance! Chad
If you share the public link it might help to have someone look at the way you have the part drawn in the design workspace. Click file in the top left and drop down to share then copy the public link and paste it here. hope this helps https://academy.titansofcnc.com/video/share-your-fusion-360-file
https://myhub.autodesk360.com/ue281bb93/data/permalink/DT8d221QT3a724cf103678e90ccb7ad7b6cc
Thanks, chad
We were discussing this in a similar topic. you can apply the same techniques shown in the screencast that I shared. Here is a link to the topic. Need some help with titan-57m
A direct link for extruding a pocket into an angled face. https://autode.sk/2VFtk0j
Thank you Stephen! It was the chain faces button that I was not clicking. I tried about every variation except that!